Below is a list of some of the common terms used on wwwflatpackitchens.com Kitchen Accessories Shopping website.
A C-Pull handle curves out from the surface of the door/drawer in the shape of a letter C. Quite a common shape and very easy to use, easily slip you fingers into the gap and pull the door/drawer open.
A D-Pull handle normally has two straight post legs followed by a curve, more or less in the shape of a capital D.
A Rail handle usually has two straight post legs joined by a bar or rail that extends past the legs.
A T-Bar has just one post leg, surmounted by a bar or rail.
D or Ø
D or Ø followed by a number is an abbreviation for Diameter. The number is the diameter in millimetres of the knob or handle, eg. D25 or Ø25 is a diameter of 25mm and D30 or Ø30 is a diameter of 30mm
Normally diameter is associated with knobs and is the distance from one edge of the knob to the other at its widest point.
CC is the abbreviation for Centre to Centre it can also be used as “CtC” It is the measurement of the distance from the centre of one mounting screw hole to another mounting screw hole. In modern handles this is normally in System32 So the gaps increase by 32mm each time.
HC is the same as CC or CtC. HC followed by a number is an abbreviation for Hole Centre. The number is the distance in millimetres between the screw holes, eg. HC96 is Hole Centre 96mm and HC288 is Hole centre 288mm
Hole centre is the measurement between the centre of the screw holes on the handles. Thus a 96mm hole centre would indicate a distance of 96 millimetres between the centre of each post leg on the handle. Knobs typically only have one screw, so they don’t have a hole centre.
Length is the overall length of the handle from one end to the other, and can be quite different in size to the hole centre, especially in the case of Rail handles.
Normally the post diameter is associated with Rail-type handles where the rail diameter is different from the post diameter.
Normally the rail diameter is associated with Rail-type handles where the rail diameter is different from the post diameter.
Projection is the distance the handle projects outwards from the surface of the door/drawer.
Finish is the kind of finish and/or colour of finish the handle/knob has:
- ABL – Antique Black
- ABR – Antique Brass
- AL – Aluminium
- BC – Bright Chrome
- BLN – Black Nickel
- BRN – Brushed Nickel
- MB – Matt Black
- PB – Polished Brass
- PC – Polished Chrome
- PEW – Pewter
- PL – Platinum
- SC – Satin Chrome
- SS – Stainless Steel
- SSS – Satin Stainless Steel
Material is what the handle/knob is made from some of the common materials are:
- ACR – Acrylic
- ALU – Aluminium
- BR – Brass
- CM – Ceramic
- GL – Glass
- HB – Hollow Brass
- K9 – K9 Crystal
- LTH – Leather
- PC – Porceline
- PL – Plastic
- SB – Solid Brass
- SS – Stainless Steel
- WD – Wood
- ZA – Zinc Alloy
Code is our internal stock code. It helps us work out which handle and/or knob you are ordering, what colour and what size.
Stock Keeping Unit is our internal stock code. It helps us work out which handle and/or knob you are ordering, what colour and what size.